| Power (On/Off): | Activates the remote amplifier control unit and illuminates LED. | ||
| Bridge Excitation (On/Off): | When used with a modular strain gage spinning amplifier, this turns the excitation to the bridge on or off without turning off the amplifier. This is done by inverting the polarity of the ± 15V supply pins. | ||
Bridge ExcitationON OFF |
Output Terminal A+15 VDC -15 VDC |
Output Terminal C-15 VDC +15 VDC |
|
Shunt Calibration: (Positive/Center/Negative) |
Remotely applies positive or negative shunt resistance across bridge terminals when used with a modular strain gage spinning amplifier. | ||
Shunt CalibrationPOSITIVE CENTER NEGATIVE |
Output Terminal F+15 VDC High Impedance -15 VDC |
||
| Indicator LED: | Illuminated whenever power is on. | ||