B4-2W Tubular Slip Ring Mounting
The B4-2W Slip Ring Assembly can be easily mounted on a shaft. An additional bushing is required when using the slip rings on shafts smaller than 2” in diameter. The slip ring rotor is configured with six #8-32 set screws used for mounting. Signal wires from the sensors can be routed along the outside diameter of the shaft. A wire path slot is machined into the slip ring rotor, enabling wires to be mounted under the slip ring and to the color coded solder terminals.
Version: 3.0 | ©2005 Michigan Scientific Corporation | Updated:
November 2, 2009 10:35 AM
Michigan Scientific Corporation 
