logo Michigan Scientific Corporation

About Us | Contact Us | Site Map | Links | Help

Model FO-HBST/HBSR Fiber-Optic Systems 1 MHz Analog Link Specifications

PARAMETER

SPECIFICATION

System Characteristics and performance

General

 

TX/RX Signal Type

differential input / single-ended output

TX Full-Scale Ranges

slide-switch selectable for ±8, ±16, ±48 VDC
RX Full-Scale Ranges
jumper configurable for ±4, ±8, ±16 VDC
Bandwidth (±4/±8V Range ONLY)
1 MHz (-3 dB) typical
Flatness (±4/±8V Range ONLY)
±1 dB to 500 kHz typical

Rise/Fall Times

~ 300 ns (20-80%) typical
End to End Delay
<1.8 μs
Output Noise

<10 mV rms

Resolution (±8, ±16, ±48 V Full-Scale)

> 4 mV/ 8 mV/ 24 mV

DC Gain Adjustment (Receiver)

-10% to +25% of scale
DC Offset Adjustment (Receiver)
±1 VDC

DC Offset Drift

<0.5% drift through temp. range
Over-Range Protection
±100 V continuous and ±350 V transient protection
Transmitter Input Impedance
 

@ ±8, ±16, ±48 V

> 72.5 kΩ, 145 kΩ, 435 kΩ

@1MHz

> 25 MΩ
Receiver Output Impedance
100 Ω

Maximum Recommended External Load

1 KΩ (High-Z load for max runtime)
Power Source
3-AA alkaline batteries or external adapter
Battery Life
 

Transmitter

continuous >25 Hours

Receiver (load and frequency dependent)

continuous >16 Hours

Physical

 

Dimensions (L x W x H)

6.8 x 3.0 x 1.0 in (172 x 76 x 25 mm)
Weight [w/o Batteries]
13 oz (368.5 g) [10 oz (283.5 g)]
Input / Output Connector
BNC
Optical Connectors
ST
Optical Cables
multimode graded-index 62.5/125 μm or 100/140 μm
Optical Cable Length
1640 ft (500 m) max.

Environmental

  

Operating Temperature

-10º F to +185º F (-12º to +85º C)
Operating Humidity
95% R.H. max. non-condensing
EMC
300 V/m at 500 kHz to 1 GHz, 200 V/m at 1 GHz to 11 GHz, and 600 V/m (pulsed 5% duty-cycle & 5μs rise-time) 1 GHz to 2.5 GHz

Quality and Safety

 

CE Mark

Declaration of Conformity provided

RoHS & WEEE

Compliant
 
Version: 3.0 | ©2005 Michigan Scientific Corporation | Updated: June 3, 2008 11:57 AM